Transmitting Radar Signals

NOTE: As a safety feature, the radar enters standby mode after it warms up. This gives you an opportunity to verify the area around the radar is clear before beginning radar transmission.
  1. With the chartplotter off, connect your radar as described in the radar installation instructions.
  2. Turn on the chartplotter.

    If necessary, the radar warms up and a countdown alerts you when the radar is ready.

  3. Select Radar.
  4. Select a radar mode.

    A countdown message appears while the radar is starting up.

  5. Select Options > Transmit Radar.
GUID-25CCEC48-337E-47C0-8B89-5C35CCDB65AC v27
March 2024