• Removing the Shaft Cap
• Removing the Existing Steering Servo Housing
• Checking the Cradle Catches
• Installing the Shaft Cap
• Installing the Transducer Cable in the Shaft Cap
• Checking the Servo Landing Pad
• Assembly Procedures
• Replacing the Upper Shaft Cap Housing
• Installing the Skeg
• Installing the Propeller
• Installing the Release Latch
• Disconnecting the Antenna Box Cables
• Removing the Depth-Adjustment Assembly
• Shaft and Cable Parts
• Tools, Supplies, and Equipment Needed for Maintenance
• Replacing the Latch Pedal
• Removing the Pivot Pin
• Installing the Bushings in the Steering Servo Housing
• Replacing the Mount Shrouds
• Removing the Propeller Drive Motor
• Connecting the Cables in the Shaft Cap
• Trademark Notices
• Removing the Latch Pedal
• Removing the Steering Servo
• Removing the Latch Pushers
• Replacing the Latch and Cradle Tension Springs
• Installing the Shaft Mini-Tumbler and Biasing Bushing
• Replacing the Release Latch
• Service Parts
• Removing the Coil Cable Junction Box from the Mount Base
• Replacing the Shaft Mini-Tumbler and Biasing Bushing
• Replacing the Full Drive Assembly
• Replacing the Pivot Pin
• Removing the Mount Shrouds
• Mount Parts
• Replacing the Mount and Servo Bushings
• Replacing the Full Servo Assembly
• Connecting the Coil Cable Junction Box to the Mount Base
• Installing the Cradle Tension Springs
• Removing the Coil Cable from the Shaft Cap
• Cleaning and Lubricating the Locking Mechanism
• Routing the Power and Transducer Cables Through the Mount
• Installing the Mount Shrouds
• Checking the Latch Pedal
• Removing the Servo Landing Pad
• Installing the Antenna Box
• Opening the Shaft Cap
• Removing the Skeg
• Replacing the Latch Pusher Hardware
• Replacing the Shaft and Motor Assembly
• Reinstalling the Pivot Pin
• Replacing the Full Shaft Cap
• Installing the Cradle Hardware
• Installing the Display Panel
• Connecting the Steering Servo Cables
• Installing the Coil Cable in the Shaft Cap
• Removing the Antenna Box
• Removing the Shaft Mini-Tumbler and Biasing Bushing
• Removing the Latch Tension Springs
• Replacing the Cradle Hardware
• Installing the Latch Tension Springs
• Checking the Latch Pusher Linkage
• Replacing the Coil Cable and Junction Box
• Tools, Supplies, and Equipment Needed for Repair
• Replacing the Servo Landing Pad
• Removing the Latch Pusher Linkage
• Fixing Paint Scratches
• Removing the Cradle Tension Springs
• Removing the Shaft Mini-Tumbler and Biasing Bushing with the Shaft Installed
• Installing the Replacement Steering Servo
• Lubricating the Hinge
• Installing the Latch Pusher Linkage on the Latch Pedal
• Service Procedures
• Installing the Latch Pedal
• Removing the Transducer
• Connecting the Antenna Box Cables
• Removing the Shaft from the Steering Servo Housing
• Removing the Cradle Hardware
• Replacing the Display Panel
• Installing the Latch Pushers
• Replacing the Depth Adjustment Assembly
• Installing the Propeller Drive Motor
• Servicing the Anodes
• Closing the Shaft Cap
• Disassembly Procedures
• Propeller Drive Motor Parts
• Maintenance Needs and Schedule
• Removing the Display Panel
• Removing the Skeg and Nose Cone
• Overview and Part Locations
• Checking the Motor Cradle and Latch Pedal Springs
• Replacing the Shaft Cap and Antenna Box
• Disconnecting the Cables in the Shaft Cap
• Feeding the Cables Through the Shaft
• Replacing the Bottom Shaft Cap Assembly
• Reinstalling the Depth-Adjustment Assembly
• Removing the Release Latch
• Removing the LiveScope Transducer Cable from the Shaft Cap
• Installing the Shaft in the Steering Servo Housing
• Disconnecting the Steering Servo Cables
• Removing the Propeller
• Installing the Servo Landing Pad
• Tools, Supplies, and Equipment Needed