Skip to main content

Opening the Shaft Cap

WARNING

Before you open the shaft cap, you must disconnect the motor from the power source. Failure to disconnect the power source can lead to electrical shock or damage to the motor.

  1. Using a #2 Phillips screwdriver, remove the four screws that secure the lid of the shaft cap.

    Shaft Cap Diagram
  2. Carefully lift up the lid of the shaft cap to access the cable connectors inside.
    NOTICE

    There are two cables connected to the top of the shaft cap. Take care when opening the shaft cap to avoid damaging the cables or connectors.

GUID-828BF524-69C7-4E20-A109-CE89908F9BDD v2
June 2024
© 2024 Garmin Ltd.