When performing routine maintenance, you may need the following tools and supplies.

• #2 Phillips bit or screwdriver

• 5 mm, 4 mm, 3 mm, and 2.5 mm hex bits or wrenches

• ⁹/₁₆ in. socket for removing the propeller (a 15 mm socket can be used, if necessary)

• Replacement anodes (010-12832-35)

• Wire brush

• Synthetic or marine grade, general-purpose grease

• Non-stick, dry-film lubricant (such as DuPont™ Dry Film Lubricant with Teflon^®)

• Dielectric grease

• Isopropyl alcohol (for cleaning areas before applying touch-up paint)

• Liquid polyurethane paint (for touching up nicks and scratches)