Skip to main content

Replacing the Shaft and Motor Assembly

  1. Open the shaft cap (Opening the Shaft Cap).
  2. Disconnect the shaft cap cables (Disconnecting the Cables in the Shaft Cap).
  3. Remove the shaft cap (Removing the Shaft Cap).
  4. Remove the skeg (Removing the Skeg).
  5. Remove the propeller (Removing the Propeller).
  6. Remove the depth-adjustment assembly (Removing the Depth-Adjustment Assembly).
  7. Remove the old shaft and motor assembly (Removing the Shaft from the Steering Servo Housing).
  8. Remove the mini-tumbler and biasing bushing (Removing the Shaft Mini-Tumbler and Biasing Bushing).
  9. Install the new shaft and motor assembly (Installing the Shaft in the Steering Servo Housing).
  10. Install the mini-tumbler and biasing bushing (Installing the Shaft Mini-Tumbler and Biasing Bushing).
  11. Install the depth-adjustment collar (Reinstalling the Depth-Adjustment Assembly).
  12. Install the propeller (Installing the Propeller).
  13. Install the skeg (Installing the Skeg).
  14. Install the shaft cap (Installing the Shaft Cap).
  15. Connect the shaft cap cables (Connecting the Cables in the Shaft Cap).
  16. Close the shaft cap (Closing the Shaft Cap).
GUID-828BF524-69C7-4E20-A109-CE89908F9BDD v2
June 2024
© 2024 Garmin Ltd.