Installing the Propeller
-
Insert the pin
through the propeller motor shaft
.
- If necessary, rotate the motor shaft to orient the pin horizontally so it is less likely to fall out during installation.
-
Align the channel on the inside of the propeller
with the pin, and slide the propeller onto the motor shaft.
-
Place the anode
, washer
, lock washer
, and nut
onto the end of the motor shaft.
- Using a 9/16 in. (14 mm) socket, tighten the lock nut to 8.13 N-m (6 lbf-ft) to secure the propeller.
Parent Topic: Assembly Procedures