Skip to main content

Installing the Replacement Steering Servo

  1. Remove the bushings from the previous steering servo housing and install them in the new steering servo housing (Installing the Bushings in the Steering Servo Housing).
  2. Reinstall the pivot pin (Reinstalling the Pivot Pin).
  3. Connect the steering servo cables (Connecting the Steering Servo Cables).
  4. Install the servo landing pad (Installing the Servo Landing Pad).
  5. Install the shaft in the steering servo housing (Installing the Shaft in the Steering Servo Housing).
  6. Install the shaft mini-tumbler and biasing bushing (Installing the Shaft Mini-Tumbler and Biasing Bushing).
  7. Install the depth-adjustment collar (Reinstalling the Depth-Adjustment Assembly).
  8. Install the shaft cap (Installing the Shaft Cap).
  9. Connect the cables in the shaft cap (Connecting the Cables in the Shaft Cap).
  10. Close the shaft cap (Closing the Shaft Cap).
  11. Install the mount shrouds (Installing the Mount Shrouds).
GUID-828BF524-69C7-4E20-A109-CE89908F9BDD v2
June 2024
© 2024 Garmin Ltd.