Skip to main content

Feeding the Cables Through the Shaft

  1. Place the grommet nut Callout number 1 over the transducer cable Callout number 2 with the threaded side facing the downshaft adapter.

    motor diagram with callouts
  2. Feed the transducer cable a few feet into the shaft through the front hole of the downshaft adapter.
  3. Bundle the power cables Callout number 3 and feed them completely through the shaft with the transducer cable.
GUID-828BF524-69C7-4E20-A109-CE89908F9BDD v2
June 2024
© 2024 Garmin Ltd.