Skip to main content

Replacing the Mount and Servo Bushings

  1. Deploy the motor.
  2. Remove the mount shrouds (Removing the Mount Shrouds).
  3. Remove the old cradle hardware (Removing the Cradle Hardware).
  4. Install the cradle hardware with new bushings (Installing the Cradle Hardware).
  5. Remove the servo landing pad (Removing the Servo Landing Pad).
  6. Remove the pivot pin (Removing the Pivot Pin).
  7. Remove the servo housing.
  8. Install the new bushings in the servo assembly (Installing the Bushings in the Steering Servo Housing).
  9. Set the servo housing in place.
  10. Reinstall the pivot pin (Reinstalling the Pivot Pin).
  11. Connect the steering servo cables (Connecting the Steering Servo Cables).
  12. Install the servo landing pad (Installing the Servo Landing Pad).
  13. Install the mount shrouds (Installing the Mount Shrouds).
GUID-828BF524-69C7-4E20-A109-CE89908F9BDD v2
June 2024
© 2024 Garmin Ltd.