Skip to main content

Removing the Existing Steering Servo Housing

  1. Remove the mount shrouds (Removing the Mount Shrouds).
  2. Open the shaft cap (Opening the Shaft Cap).
  3. Disconnect the cables in the shaft cap (Disconnecting the Cables in the Shaft Cap).
  4. Remove the shaft cap (Removing the Shaft Cap).
  5. Remove the depth-adjustment assembly (Removing the Depth-Adjustment Assembly).
  6. Remove the shaft from the steering servo housing (Removing the Shaft from the Steering Servo Housing).
  7. Remove the shaft mini-tumbler and biasing bushing (Removing the Shaft Mini-Tumbler and Biasing Bushing).
  8. Remove the servo landing pad (Removing the Servo Landing Pad).
  9. Remove the pivot pin (Removing the Pivot Pin).
GUID-828BF524-69C7-4E20-A109-CE89908F9BDD v2
June 2024
© 2024 Garmin Ltd.