Tools, Supplies, and Equipment Needed for Repair
When performing repair or replacement procedures, you must have the following tools and supplies.
-
Suitable workbench or table
-
Must be at least 10 ft. long for working on the 63 in. models
-
Must be at least 11 ft. long for working on the 75 in. models
-
Must be at least 15 ft. long for working on the 90 in. models
-
-
#1, #2, and #3 Phillips screwdrivers
-
2.5 mm, 3 mm, 4 mm, and 5 mm hex bits or wrenches
-
9/16 in. socket for removing the propeller. A 15 mm socket is acceptable, if necessary.
-
Torque wrench
-
With 4 mm and 5 mm hex bits
-
Capable of measuring torque from 4 N-m (3 lbf-ft) to 8.1 N-m (6 lbf-ft.)
-
-
Needle-nose pliers
-
Synthetic or marine grade general-purpose grease (for replacing the latching mechanism)
-
Dielectric grease (for replacing the power cable or coil cable)