Skip to main content

Replacing the Depth Adjustment Assembly

  1. Disconnect the power cable and transducer cable (if present).
  2. Remove the mount shrouds (Removing the Mount Shrouds).
  3. Open the shaft cap (Opening the Shaft Cap).
  4. Disconnect the shaft cap cables (Disconnecting the Cables in the Shaft Cap).
  5. Remove the shaft cap (Removing the Shaft Cap).
  6. Remove the depth-adjustment assembly (Removing the Depth-Adjustment Assembly).
  7. Install the new depth-adjustment collar (Reinstalling the Depth-Adjustment Assembly).
  8. Install the shaft cap (Installing the Shaft Cap).
  9. Connect the shaft cap cables (Connecting the Cables in the Shaft Cap).
  10. Close the shaft cap (Closing the Shaft Cap).
  11. Reconnect the power cable and transducer cable (if present).
GUID-828BF524-69C7-4E20-A109-CE89908F9BDD v2
June 2024
© 2024 Garmin Ltd.