Skip to main content

Removing the Coil Cable Junction Box from the Mount Base

Before you can remove the coil cable junction box, you must remove the mount base shrouds (Removing the Mount Shrouds).
TIP: Count and record the number of coils in the coil cable before removing it to simplify reinstallation.
  1. Disconnect the data cable Callout number 1 from the port on the coil cable junction box.

    Device Side View
  2. Using a 3 mm hex bit or screwdriver, remove the three screws that secure the coil cable junction box to the mount base.
  3. If a transducer extension is present, disconnect it.
  4. Pull the coil cable junction box away from the mount base to remove it.
  5. Pull the power cable through the mount base.
GUID-828BF524-69C7-4E20-A109-CE89908F9BDD v2
June 2024
© 2024 Garmin Ltd.