Using the Bilge Pump Switches

You can manually operate connected bilge pumps by using switches 12 and 13 on the Garmin® chartplotter.

  1. From a Garmin chartplotter connected to the same NMEA 2000® network as the Garmin Boat Switch™ device, select Vessel > Switching.
  2. Select an option:
    • Press and hold the bilge pump switch for one second to run the bilge pump for 2 minutes.

    • Press and hold the bilge pump switch for three seconds to run the bilge pump continuously.
      NOTE: Your Garmin chartplotter notifies you every 5 minutes while continuous mode is active.
GUID-3E67C80C-0812-4EEC-BC60-699751B9CF6F v7
September 2024