Other Vessels Settings
The Beeper setting must be turned on to make alarms audible (Sounds and Display Settings). Failure to set audible alarms could lead to injury or property damage.
When your compatible chartplotter is connected to an AIS device or VHF radio, you can set up how other vessels are displayed on the chartplotter.
Select
.- AIS
-
Enables and disables AIS signal reception.
- DSC
-
Enables and disables digital selective calling (DSC).
- Collision Alarm
-
Sets the collision alarm (Setting the Safe-Zone Collision Alarm).
- AIS-EPIRB Test
-
Enables test signals from Emergency Position Indicating Radio Beacons (EPRIB).
- AIS-MOB Test
-
Enables test signals from man overboard (MOB) devices.
- AIS-SART Test
-
Enables test transmissions from Search and Rescue Transponders (SART).
Parent Topic: Device Configuration