Skip to main content

Engaging Wind Hold

Before you can engage wind hold, you must connect a NMEA 2000® wind sensor to the autopilot.

Although a NMEA 2000 wind sensor is preferred, you can connect a NMEA® 0183 wind sensor to the autopilot to use wind hold.

  1. When the autopilot is in standby mode, select Options.
  2. Select an option:

    • To engage an apparent wind hold, select Engage App. Wind Hold.

    • To engage a true wind hold, select Engage True Wind Hold.

    TIP: You can quickly engage the last type of wind hold used by selecting Wind Hold from standby mode.
GUID-3E67C80C-0812-4EEC-BC60-699751B9CF6F v7
September 2024
© 2021 Garmin Ltd.