Skip to main content

Setting the Bow Offset

Based on the installation angle, the trolling motor may not align with the center line of your boat. For the best results, you should set the bow offset.

  1. Using the remote control, adjust the angle of the trolling motor Callout number one so it aligns with the center line of your boat Callout number two, pointing straight forward.

    Setting the bow offset example
  2. On the remote control, select Menu button > Settings > Trolling Motor > Calibrate > Bow Offset.
  3. Repeat this procedure if necessary.
Copyright © Garmin. All rights reserved.GUID-16D2E284-7D08-461D-80CE-7D490C67A3EB v4