• Removing the Shaft Cap
• Reconnecting the Upper Link to the Mount Base
• Replacing the Display Panel
• Installing the Drive Motor and Shaft
• Disconnecting the Cables in the Shaft Cap
• Removing the Propeller Drive Motor
• Lubricating the Hinges and Bushings
• Connecting the Cables in the Shaft Cap
• Removing the Propeller Drive Motor and Nose Cone from the Shaft
• Installing the Transducer Cable in the Shaft Cap
• Replacing the Mount Base
• Replacing the Pull Cable
• Checking and Replacing the Mount Bumper
• Installing the Shaft Cap
• Removing the Upper Link from the Mount Base
• Mount Parts
• Tools, Supplies, and Equipment Needed for Repair
• Overview and Part Locations
• Installing the Nose Cone and Skeg
• Replacing the Nose Cone
• Cleaning and Lubricating the Locking Mechanism
• Replacing the Mount Rails
• Replacing the Lower Gas Spring
• Replacing the Propeller
• Removing the Transducer Cable from the Shaft Cap
• Fixing Paint Scratches
• Removing the Pull Cable
• Replacing the Mount Bumper
• Removing the Steering Servo from the Mount
• Shaft and Cable Parts
• Installing the Coil Cable in the Shaft Cap
• Service Procedures
• Connecting the Upper Link of the Mount to the Steering Servo Housing
• Checking and Replacing the Mount Rails
• Maintenance Needs and Schedule
• Replacing the Mount Shrouds
• Trademark Notices
• Removing the Power and Transducer Cables From the Mount
• Installing a New Pull Cable
• Installing the Handle on the Pull Cable
• Disconnecting the Upper Gas Spring
• Connecting the Motor to the Display Panel
• Installing the Propeller Drive Motor
• Removing the Coil Cable from the Steering Servo Housing
• Removing the Lower Link from the Mount Base
• Installing the Nose Cone and Transducer in the Shaft
• Servicing the Anodes
• Disassembling the Nose Cone
• Closing the Shaft Cap
• Service Parts
• Reconnecting the Coil Cable
• Removing the Pull Cable Handle
• Checking and Cleaning the Power Terminals
• Removing the Skeg and Nose Cone
• Disconnecting the Upper Link of the Mount
• Installing the Shaft in the Steering Servo Housing
• Replacing the Stow Support
• Removing the Shaft from the Steering Servo
• Tools, Supplies, and Equipment Needed for Maintenance
• Replacing the Upper Gas Spring
• Securing the Upper Gas Spring
• Disconnecting the Lower Link of the Mount from the Steering Servo
• Connecting the Steering Servo to the Mount
• Reconnecting the Lower Link to the Mount Base
• Routing the Power and Transducer Cables Through the Mount
• Removing the Power Cable from the Steering Servo Housing
• Propeller Drive Motor Parts
• Mount Base Parts
• Replacing the Locking Mechanism in the Lower Link
• Removing the Depth-Adjustment Collar
• Removing the Coil Cable from the Shaft Cap
• Installing the Propeller Drive Motor in the Shaft
• Opening the Shaft Cap
• Disconnecting the Lower Gas Spring
• Installing the Steering Servo on the Lower Link of the Mount
• Removing the Shaft and Propeller Drive Motor from the Steering System
• Removing the Nose Cone and Transducer
• Reconnecting the Power Cable
• Securing the Lower Gas Spring
• Tools, Supplies, and Equipment Needed