Skip to main content

Replacing the Propeller

If the propeller is damaged, you must replace it.

  1. Using a 15 mm socket, remove the nut Callout number one that secures the propeller.

    Propeller disassembly with callouts

  2. Remove the lock washer Callout number two, flat washer Callout number three, anode Callout number four, and damaged propeller Callout number five.
  3. Service the anode, if necessary (Servicing the Anodes).
  4. If necessary, install the pin Callout number six in the propeller motor shaft Callout number seven.
  5. Install a replacement propeller.
  6. Place the anode, flat washer, lock washer, and nut onto the end of the motor shaft.
  7. Using a 9/16 in (15 mm) socket, tighten the nut to 8.13 N-m (6 lbf-ft) to secure the propeller.
Copyright © Garmin. All rights reserved.GUID-F61CDD86-17CE-4801-B775-07A31282A541 v2