Skip to main content

Opening the Shaft Cap

NOTICE

Before you open the shaft cap, you must disconnect the motor from the power source.

  1. Using a #2 Phillips screwdriver, remove the four screws that secure the lid of the shaft cap.

    Exploded view of the top of the shaft cap and the screws that secure it to the shaft cap

    You should place these screws in a safe place, because you must use them to close the shaft cap.

  2. Lift up to remove the lid of the shaft cap.
Copyright © Garmin. All rights reserved.GUID-F61CDD86-17CE-4801-B775-07A31282A541 v2