Skip to main content

Removing the Shaft and Propeller Drive Motor from the Steering System

Before you can remove the shaft and propeller drive motor, you must remove the transducer cable from the mount, if applicable (Removing the Power and Transducer Cables From the Mount).

  1. Disconnect the motor from the power source.
  2. Open the shaft cap (Opening the Shaft Cap).
  3. Disconnect the cables in the shaft cap (Disconnecting the Cables in the Shaft Cap).
  4. Remove the transducer cable from the shaft cap (Removing the Transducer Cable from the Shaft Cap).
  5. Remove the shaft cap (Removing the Shaft Cap).
  6. Remove the shaft from the steering system (Removing the Shaft from the Steering Servo).
Copyright © Garmin. All rights reserved.GUID-F61CDD86-17CE-4801-B775-07A31282A541 v2