When performing routine maintenance, you must have the following tools and supplies.

• #2 Phillips screwdriver

• 4 mm and 3 mm hex bits or wrenches

• 10 and 15 mm sockets

• ⁹/₁₆ in. socket

  • For removing the propeller

  • A 15 mm socket is acceptable, if necessary

• Replacement anodes (010-12832-35)

• Wire brush

• Silicone lubricating grease

• Non-stick, dry-film lubricant (such as DuPont™ Dry Film Lubricant with Teflon^®)

• Dielectric grease

• Isopropyl alcohol (for cleaning areas before applying touch-up paint)

• Liquid polyurethane paint (for touching up nicks and scratches)