Skip to main content

Replacing the Mount Base

  1. Remove the steering servo from the mount (Removing the Steering Servo from the Mount).
  2. Remove the upper link from the mount base (Removing the Upper Link from the Mount Base).
  3. Remove the lower link from the mount base (Removing the Lower Link from the Mount Base).
  4. Uninstall the fasteners that secure the mount base to the boat.
  5. Secure the replacement mount base to the deck of the boat, replacing the existing mounting hardware if necessary.
  6. Install the lower link on the mount base (Reconnecting the Lower Link to the Mount Base).
  7. Install the upper link on the mount base (Reconnecting the Upper Link to the Mount Base).
  8. Install the steering servo on the mount (Connecting the Steering Servo to the Mount).
Copyright © Garmin. All rights reserved.GUID-F61CDD86-17CE-4801-B775-07A31282A541 v2