Skip to main content

Removing the Steering Servo from the Mount

Before you can remove the steering servo from the mount, you must remove the power and transducer cables from the mount (Removing the Power and Transducer Cables From the Mount).

  1. Disconnect the lower gas spring (Disconnecting the Lower Gas Spring).
  2. Disconnect the upper link of the mount (Disconnecting the Upper Link of the Mount ).
  3. Disconnect the upper gas spring (Disconnecting the Upper Gas Spring).
  4. Disconnect the lower link of the mount (Disconnecting the Lower Link of the Mount from the Steering Servo).
Copyright © Garmin. All rights reserved.GUID-F61CDD86-17CE-4801-B775-07A31282A541 v2