Skip to main content

Installing the Coil Cable in the Shaft Cap

  1. Feed the cables from the existing or replacement coil cable into the hole on the shaft cap.
  2. Using the existing plastic nut Callout number one or the nut provided with the replacement coil cable, secure the coil-cable connector to the shaft cap.

    Removing the coil cable from the shaft cap
  3. Using a 36 mm or adjustable wrench, tighten the plastic nut on the coil-cable connector inside the shaft cap
Copyright © Garmin. All rights reserved.GUID-F61CDD86-17CE-4801-B775-07A31282A541 v2