Skip to main content

Checking and Replacing the Mount Bumper

The mount bumper is the part of the mount base that overhangs the bow of the boat.

  1. Place the motor between the stowed and deployed positions, and check the mount bumper for damage.
  2. Select an action:

    • If the mount bumper is undamaged, no further action is needed.

    • If the mount bumper is damaged, proceed to the next step to replace it.

  3. Using a 4 mm hex bit or wrench, remove the two screws that secure the mount bumper to the mount base.

    Mount bumper removal with callout
  4. Install a replacement mount bumper, and secure it to the mount base using the screws provided with the replacement part.
Copyright © Garmin. All rights reserved.GUID-F61CDD86-17CE-4801-B775-07A31282A541 v2