Installing the Propeller Drive Motor in the Shaft
You must perform these actions to reassemble the propeller drive motor in the shaft.
The screws, replacement seals, and grease packet are included in the motor hardware service kit (S00-01000-35). You should use the new parts from the kit instead of reusing the screws and seals you removed with the propeller drive motor.
- Install the nose cone and transducer in the shaft (Installing the Nose Cone and Transducer in the Shaft).
- Install the propeller drive motor on the shaft (Installing the Propeller Drive Motor).
- Install the nose cone and skeg on the propeller drive motor (Installing the Nose Cone and Skeg).