• Weather Data Broadcasts
• Registering Your Device Using the Garmin Express App
• Viewing Local Weather Information near a Buoy
• Configuring the Video Appearance
• Following the U-Turn Pattern
• Man-Overboard and SOS Distress Calls Initiated from the Chartplotter
• Changing the Weather Chart
• Contacting Garmin Support
• Cancelling a Steering Pattern
• Trolling Motor Settings
• Customizing the Data Overlays
• LiveScope and Perspective Appearance Settings
• Starting Line Guidance
• Yamaha Autopilot Overlay Bar
• Forecast Information
• Managing the Track Log Memory During Recording
• Viewing Boat Data on a Garmin Nautix Device
• Garmin Express App
• Communications Settings
• Customizing the Channel Guide
• Garmin Support Center
• Viewing Messages
• NMEA 2000 PGN Information
• Restoring the Original Chartplotter Factory Settings
• Camera Settings
• Adjusting Gain on the Radar Screen Automatically
• GPSMAP 7x2/7x2 Plus Specifications
• LiveVü and FrontVü Layout Settings
• Creating a Waypoint on the Chart
• Enabling AIS Transmission Test Alerts
• Current Station Information
• Setting the Power Saver
• LiveVü Forward and FrontVü Sonar Menu
• Viewing a Marine Forecast or an Offshore Forecast
• Changing the Data Shown
• My device will not acquire GPS signals
• Heading and Projected Course of Activated AIS Targets
• Depth Layer Settings
• Selecting a Preset
• Adjusting Sea Clutter on the Radar Screen
• Turning On and Off the Remote Backlight
• Adjusting a Saved Auto Guidance Path
• Adjusting the RealVü Sweep Speed
• Adjusting Gain on the Radar Screen Manually
• Force Trolling Motor Control
• Parental Controls
• Changing the Sonar View
• Panoptix LiveScope Sonar View
• Adding and Editing a Digital Switching Page
• Sounds and Display Settings
• Trademark Notices
• Chart Symbols
• Disabling all Boundary Alarms
• Acquiring MARPA Targets Automatically
• Retracing the Active Track
• Associating the Camera to a Video Source
• VHF Radio
• Selecting a Sonar Source
• Destinations
• Front-of-Boat Offset
• Setting Up the Battery Management Page
• Setting the Water Temperature Offset
• Stopping the Sonar Recording
• Man-Overboard Distress Calls Initiated from a VHF Radio
• Radar
• Customizing the Layout of a SmartMode or Combination Page
• Sending an inReach Preset Message
• Auto Guidance Path Configurations
• Wi‑Fi Network
• Panoptix Sonar Views
• Navigating to a Point on the Chart
• Browsing for and Navigating Parallel to a Saved Route
• Updating the Reactor Autopilot Remote Control Software
• Wireless Remote Control
• Enabling the Gybe Inhibitor
• Editing Information in a Position Report
• Yamaha Engine Gauges
• Searching for a Destination by Name
• Weather Fronts and Pressure Centers
• NMEA 0183 Settings
• Adjusting the RealVü Viewing Angle and Zoom Level
• Stopping Navigation
• Saving a DAB Station as a Preset
• Engaging Wind Hold from Heading Hold
• LiveVü and FrontVü Appearance Settings
• Yamaha Autopilot Screen
• Clearing the Echo Trails
• Pairing the Wireless Remote Control With the Chartplotter
• My Vessel Layer Settings
• Turning On the Chartplotter Automatically
• Browsing for Music
• Radar Setup Menu
• Adding an Item to Favorites
• Sailboat Autopilot Operation
• Muting the Media Volume
• Managing Presets
• Downloading Garmin Quickdraw Community Maps Using ActiveCaptain
• Viewing Information for a Different Tide or Current Station
• Autopilot Screen
• Enabling a Guard Zone
• Connecting to a Trolling Motor
• Searching for a Marine Services Destination
• Connecting an inReach Device to the Chartplotter
• Adjusting the Distance from Shore
• Adjusting the Color Intensity
• City Forecasts
• Tack and Gybe
• Settings that are Synced on the Garmin Marine Network
• Measuring the Range and Bearing to a Target Object
• Tracks
• Creating a Waypoint on the Sonar Screen
• Removing DAB Presets
• Pairing the GC 100 Camera with a Garmin Chartplotter
• Viewing Weather Subscription Information
• Deleting All Saved Routes
• Trolling Motor Control Bar
• Memory Cards
• Setting the Heading Line and Angle Markers
• Creating a New Combination Page
• Replying to an inReach Message
• Adjusting Rain Clutter on the Radar Screen
• Deleting a Combination Page
• Celestial Information
• Activating a Target for an AIS Vessel
• Adding a DSC Contact
• Stopping the Race Timer
• Setting the Vessel Type
• Dometic Optimus Features
• Specifications
• Tide Station Information
• Customizing the Gauges
• Garmin Quickdraw Contours Settings
• inReach Messages
• Engaging the Autopilot
• Removing a MARPA Tag from a Targeted Object
• Panoptix Transducer Installation Settings
• Showing Satellite Imagery on the Navigation Chart
• Changing the Radar Mode
• Heading Line and Angle Markers
• Marking Your Present Location as a Waypoint
• Adjusting the Heading with the Chartplotter in Step Steering Mode
• Changing the Sea Surface Temperature Color Range
• Adding a SmartMode Layout
• Calibrating the Compass
• Sharing Your Garmin Quickdraw Contours Maps with the Garmin Quickdraw Community Using ActiveCaptain
• Configuring the Tank Level Sensors
• Enabling and Adjusting a Radar No Transmit Zone
• Renaming a Sonar Source
• AIS Distress Signals
• Auto Guidance
• Viewing Fish Mapping Data
• Introduction
• GPSMAP 12x2 Touch/A12/12x2 Plus Connector View
• RealVü 3D Historical Sonar View
• Navigating to a Distress Signal Transmission
• Editing a Saved Track
• Setting the Fuel Alarm
• Scanning for DAB Stations
• Deleting a Saved Route
• Enabling Shadow Drive
• Getting Started with the ActiveCaptain App
• Saving System Information to a Memory Card
• Reactor Autopilot Remote Control
• Position Tracking
• Editing a Boundary
• GPSMAP 7x2/7x2 Plus and GPSMAP 9x2/9x2 Plus Connector View
• Making Notifications Private
• Customizing the Autopilot Button Actions
• Updating Software with the ActiveCaptain App
• Setting Up the Timed Transmit Mode
• Updating Built-In Maps with a Memory Card and Garmin Express
• Setting the Keel Offset
• Radar Overlay and Chart Data Alignment
• Adjusting the Level of Detail
• Activating the Optimus Overlay Bar
• Adjusting the Heading with the Helm
• Acquiring GPS Satellite Signals
• Adjusting the Wind Sensor Orientation
• Yamaha Autopilot Settings
• Using Video Presets on Networked Video Cameras
• Backing Up Data to a Computer
• Deleting a Sonar Recording
• Calibrating a Water-Speed Device
• Setting a Tack and Gybe Delay
• Adding the Trolling Motor Controls to Screens
• Surface Pressure and Water Temperature Data
• Waypoints
• Adding the VIRB Action Camera Controls to Other Screens
• Controlling the Autopilot with a GRID 20 Remote Control
• Setting Up and Following a Search Pattern
• Updating Charts with ActiveCaptain
• Copying User Data from a Memory Card
• Radar Appearance Settings
• Selecting the Transducer Type
• LiveVü Forward Sonar View
• Viewing the Event Log
• GPSMAP 12x3 Specifications
• Radar Gain
• Customizing the Engines Shown in Gauges
• Navigating to a Vessel in Distress
• Preferences Settings
• Naming Devices and Sensors on the Network
• Auto Guidance Path Configurations
• Optimus Limp Home Mode
• Deleting All Saved Waypoints, Tracks, Routes, and Boundaries
• MARPA
• Setting Up and Following the Circles Pattern
• Radar Overlay
• Viewing Precipitation Information
• Adjusting the Autopilot Response
• Enabling Smart Notifications
• Saving a New Preset
• Viewing a Position Report
• Pairing the GRID Device with the Chartplotter from the Chartplotter
• Split-Zoom Sonar View
• Selecting a DAB Station from a Category
• Starting a VIRB Video Slideshow
• Configuring the Number of Engines
• Viewing Forecast Sea Conditions Information for Another Time Period
• NMEA 0183 Information
• Connecting a Wireless Sensor to the Chartplotter
• Creating and Saving an Auto Guidance Path
• Downloading Garmin Quickdraw Community Maps Using Garmin Connect
• Media Player
• Panoptix Sonar Setup
• Chart Layers
• Viewing Video
• Automatically Turning Off the System
• Resetting Trip Gauges
• Autopilot Overlay Bar
• Assigning a MARPA Tag to an Object
• Configuring the Sailing Wind Gauge
• Enabling Some Engine Gauge Status Alarms
• Yamaha Engine Data Settings
• NMEA 2000 Settings
• Creating a Frequency Preset
• Showing AIS Vessels on the Radar Screen
• Sonar Appearance Settings
• Accessing Owner's Manuals on the Chartplotter
• AIS Targeting Symbols
• Capturing Screenshots
• Linking a Boundary to a SmartMode Layout
• Viewing Forecast Visibility Information for Another Time Period
• Setting Parental Controls on SiriusXM Radio Channels
• Making an Individual Routine Call to an AIS Target
• Networked Chartplotter and VHF Radio Functionality
• Chart Menu
• Projecting a Waypoint
• Viewing Images on a Memory card
• Sail Racing
• Initiating a Search Pattern
• Opening the Autopilot Screen
• Water Layer Settings
• Clearing the Active Track
• Connecting a VIRB 360 Action Camera
• Canceling an Auto Guidance Calculation in Progress
• Setting the Scroll Speed
• Recording the Sonar Display
• Pairing the GRID Device with the Chartplotter from the GRID Device
• Copying Screenshots to a Computer
• Deleting a Saved Track
• Setting the Vessel Type for Sailing Features
• Pairing a Reactor Autopilot Remote Control With a Chartplotter
• Presets
• Reducing Cross Talk Clutter on the Radar Screen
• Setting the Device Name
• Setting Weather Alarms
• Adjusting the Step Steering Increment
• Tide, Current, and Celestial Information
• Browsing for and Navigating to a Saved Waypoint
• Editing a Saved Route
• Showing and Adjusting the VRM and the EBL
• Starting the Race Timer
• Other Vessels Layer Settings
• Marine Network
• Connecting to the Garmin Quickdraw Community with Garmin Connect
• Laylines Settings
• Playing Music
• Selecting a Destination Using the Navigation Chart
• Depth Range Shading
• LiveScope and Perspective Layout Settings
• ActiveCaptain Roles
• Enabling and Disabling Zones
• Zooming In and Out Using the Touchscreen
• Navigation Settings
• Units Settings
• Radar Installation Settings
• Engine Condition Icons
• Making an Individual Routine Call
• Activating a SiriusXM Subscription
• Changing a Parental Passcode on a SiriusXM Radio
• Viewing Aerial Photos of Landmarks
• Visibility Information
• Setting a Song to Repeat
• Autopilot Configuration
• Viewing Location and Object Information on a Chart
• Customizing the Home Screen
• GPSMAP 7x3 and GPSMAP 9x3 Connector View
• Sonar Frequencies
• Showing Tides and Current Indicators
• Tips for Selecting a Radar Range
• Inserting Memory Cards (GPSMAP 7x3/9x3/12x3)
• Selecting the Preferred Heading Source
• Setting and Following an Auto Guidance Path
• Setting the Zoom Level on the Sonar Screen
• Connecting a VIRB Action Camera
• Selecting the Transducer Frequency
• Adding a Label to a Garmin Quickdraw Contours Map
• Setting the Safe-Zone Collision Alarm
• Adjusting the Color Mode
• Setting the Starting Line
• Updating Your Charts Using the Garmin Express App
• Enabling Alphabetical Search
• Deactivating a Target for an AIS Vessel
• Premium Charts
• Supported Maps
• Setting the Tuner Region
• MARPA Targeting Symbols
• Viewing the Wind Gauges
• Viewing the DSC List
• J1939 Information
• Radar Settings
• Managing Notifications
• Saving the Active Track
• DAB Playback
• Home Screen
• Weather Overlay
• Sorting and Filtering Messages
• Navigation Chart and Fishing Chart
• Fish Eye 3D Settings
• Selecting a DAB Preset from a List
• Selecting the GPS Source
• Editing a Saved Waypoint
• Mapping a Body of Water Using the Garmin Quickdraw Contours Feature
• Clearing All Locked Channels on a SiriusXM Radio
• Viewing a List of all Waypoints
• Selecting a Different Radar Source
• Screenshots
• System Alarms
• Selecting a DAB Station from a List
• Calibrating the Trolling Motor Compass
• Connecting to the Garmin Quickdraw Community with ActiveCaptain
• My device will not turn on or keeps turning off
• Measuring Distance on the Sonar Screen
• Setting the Bow Offset
• Incoming Distress Calls
• Presets
• Viewing a List of Saved Tracks
• Networked Video Devices
• Radar Options Menu
• Saving Messages to a Memory Card
• Setting the Distance between the Bow and the GPS Antenna
• Setting Alarms
• Defining a Partial Guard Zone
• Radio
• Adjusting the Radar Range
• Setting a Timed Arrival
• Viewing Tide Station, Current Station, or Celestial Information for a Different Date
• Changing the Tuning Mode
• Traditional Sonar View
• Setting the Keel Offset
• Customizing the Startup Screen
• Customizing the Close-Hauled Wind Gauge
• GPSMAP 9x2/9x2 Plus Specifications
• Viewing Information about a Targeted AIS Vessel
• VIRB Action Camera Video Setup Settings
• Optimus Overlay Symbols
• Adjusting the Distance from Shore
• Clearing all of the Messages
• Customizing the Chartplotter
• Echo Trails
• Using the Starting Line Guidance
• Selecting the Media Device and Source
• RealVü 3D Forward Sonar View
• Viewing E-label Regulatory and Compliance Information
• Setting Songs to Shuffle
• ActiveCaptain and Garmin Express
• Configuring the Heading Source of the Wind Gauge
• Changing the Data Shown in a Gauge
• Navigating to a Tracked Vessel
• Updating the Device Software Using a Memory Card
• Removing a Preset
• Adjusting the Range of the Depth or Width Scale
• Rotating the GRID Remote Input Device
• Chart Settings
• Turning Off AIS Reception
• Wireless Wind Sensor
• Garmin SideVü Sonar View
• Radar My Vessel Layer Settings
• Sonar Noise Rejection Settings
• Creating and Navigating a Route From Your Present Location
• GPSMAP 12x2 Touch/A12/12x2 Plus Specifications
• VRM and EBL
• LiveVü Down Sonar View
• Playing Sonar Recordings
• Browsing for and Navigating a Recorded Track
• Using the Touchscreen
• Viewing Trip Gauges
• Setting Up and Following the Zigzag Pattern
• Setting the Anchor Drag Alarm
• Saving a Track as a Route
• Locating a SiriusXM Radio ID
• SiriusXM Weather
• Minimizing Side-Lobe Interference on the Radar Screen
• Station Settings
• Creating and Saving a Route
• Converting a Route to a Boundary
• Sharing Your Garmin Quickdraw Contours Maps with the Garmin Quickdraw Community Using Garmin Connect
• Setting a Boundary Alarm
• Device Configuration
• Recommended Startup Image Dimensions
• Marking an SOS Location
• Loading the New Software on a Memory Card Using Garmin Express
• Viewing Sea Temperature Information
• MotionScope Doppler Radar Technology
• Changing DAB Stations
• System Settings
• Changing the Functions of the Reactor Autopilot Remote Control Action Keys
• Setting Up the Wi‑Fi Wireless Network
• AIS Aids to Navigation
• Joining the Fusion PartyBus Network
• SiriusXM Satellite Radio
• Deleting a Position-Report Call
• ActiveCaptain App
• Saving Video Presets on a Networked Video Camera
• Storm Cell and Lightning Information
• Garmin Quickdraw Community
• Viewing a List of AIS and MARPA Threats
• Battery Management
• Controlling Video Cameras Using On-Screen Controls
• Perspective View
• Radar Filter Settings
• Animated Tide and Current Indicators
• Setting Up the Gauges
• Viewing Details about Navaids
• Changing the Background Image
• VIRB Action Camera Settings
• Viewing a List of AIS and MARPA Threats
• Stopping the Transmission of Sonar Signals
• Fish Eye 3D Chart View
• Selecting a Video Source
• Warning Manager
• GPSMAP 12x3 Connector View
• Configuring the Speed Source
• Tips and Shortcuts
• Creating a Waypoint at a Different Location
• Deleting a VIRB Video
• Setting the DAB Tuner Region
• Basic Navigation Questions
• Following an Orbit Pattern
• Routes
• GPS Settings
• Laylines Settings
• Deleting a Waypoint or an MOB
• Traditional, Garmin ClearVü, and SideVü Sonar Setup
• Browsing for and Navigating a Saved Route
• Advanced Sonar Settings
• Viewing Boat Data on a Garmin Watch
• Disconnecting the Remote from All Chartplotters
• Synchronizing the Fuel Data with the Actual Vessel Fuel
• Viewing Sea Conditions
• Viewing Forecast Information for Another Time Period
• Optimus Overlay Bar Overview
• Resetting the Station Layouts
• Enabling Status Alarms for Engine Gauges
• Adjusting the Length of the Echo Trails
• Garmin Quickdraw Contours Mapping
• Setting and Following a Direct Course Using Go To
• Hurricane Information
• Unlocking SiriusXM Parental Controls
• Viewing Graphs
• Showing Tracks
• GPSMAP 9x3 Specifications
• Charts and 3D Chart Views
• Radar Overlay Settings
• DSC List
• Digital Selective Calling
• Deleting All Waypoints
• Viewing the Gauges
• Setting the Fuel Alarm
• Selecting a DSC Channel
• Assigning a Shortcut to the Trolling Motor Remote Control Shortcut Keys
• RealVü Appearance Settings
• Zooming in a Panoptix LiveVü or LiveScope Sonar View
• Moving a Saved Waypoint
• Adjusting the VHF Squelch
• Viewing Almanac Information from the Navigation Chart
• Setting the Wind Hold Type
• Viewing a List of Routes and Auto Guidance Paths
• FrontVü Sonar View
• LiveScope and Perspective Sonar Menu
• Radar Interpretation
• Controlling a Video Camera Using Gestures
• Turning On the A-Scope
• Viewing Sonar History
• AIS Distress Signal Device Targeting Symbols
• Appendix
• Measuring the Potential Front-of-Boat Offset
• Adjusting the Volume
• Saving a Station as a Preset
• Viewing Buoy Reports
• Automatic Identification System
• Scanning VHF Channels
• Transmitting Radar Signals
• Communication with Wireless Devices
• Setting the FrontVü Depth Alarm
• Alternating Among Multiple Video Sources
• Connecting a Wireless Device to the Chartplotter
• Stopping the Transmission of Radar Signals
• Autopilot
• Sonar Alarms
• Setting the Fuel Capacity of the Vessel
• Enabling Screen Lock
• Opening the Media Player
• Other Vessels Settings
• Setting the Graph Range and Time Scales
• Customizing Engine Gauge and Fuel Gauge Limits
• Sonar Fishfinder
• Sonar Models Specifications
• Traditional, Garmin ClearVü, and SideVü Transducer Installation Settings
• Sonar Alarms
• Configuring the Recording Interval of the Track Log
• Creating a Boundary
• Configuring NMEA 0183 Output Sentences
• SiriusXM Equipment and Subscription Requirements
• Garmin ClearVü Sonar View
• Customizing Pages
• Navigation with a Chartplotter
• Tacking and Gybing from Heading Hold
• Creating a Waypoint at the Position of a Tracked Vessel
• Media Player Icons
• Changing the Wi‑Fi Host
• Surface Winds
• Engaging Wind Hold
• Setting the Bow Offset
• Viewing Information about a MARPA-tagged Object
• Yamaha Autopilot
• Sonar Sharing
• Restoring Backup Data to a Chartplotter
• GPSMAP 7x3 Specifications
• Setting a Custom Park Position
• Restoring Default Parental Control Settings Values
• Converting a Track to a Boundary
• Naming Video Presets on a Networked Video Camera
• Minimizing Nearby Large-Object Interference
• Navigation Alarms
• On-Screen Buttons
• Viewing Vessel Trails on the Chart
• Installing the Garmin Express App on a Computer
• Viewing System Software Information
• Wind Hold
• Following the Williamson Turn Pattern
• Adjusting the Wind Hold Angle with the Autopilot
• Controlling the VIRB Action Camera Video Playback
• Measuring a Distance on the Chart
• Setting the Front-of-Boat Offset
• Engine Alert Icons
• Setting Up and Following the Cloverleaf Pattern
• Selecting a File Type for Third-Party Waypoints and Routes
• Changing the Wireless Channel
• Individual Routine Calls
• Receiving inReach Messages
• Weather Warnings and Weather Bulletins
• RealVü 3D Down Sonar View
• Video Settings
• User Data Layer Settings
• Steering Patterns
• Changing the Radio Station
• HDMI Out Video Considerations
• Chart Layer Settings
• Sharing and Managing User Data
• Pausing the Sonar Display
• Troubleshooting
• Turning On DSC
• Deleting All Saved Tracks
• Split-Frequency Sonar View
• Updating the Media Player Software
• SideVü Scanning Technology
• Deleting a Boundary
• Digital Switching
• Selecting the Number of Engines Shown in Gauges
• Adjusting the Backlight
• Pairing the GRID Remote Input Device with the Chartplotter
• Enabling the Autopilot Controls on a Garmin Watch
• Saving a SiriusXM Channel to the Presets List
• Garmin VIRB Action Cameras
• Defining a Circular Guard Zone
• Wave Height, Wave Period, and Wave Direction
• Gauges and Graphs
• Sonar Recordings
• Locking and Unlocking the Touchscreen
• Device Overview
• Controlling the VIRB Action Camera with the Chartplotter
• Activating Video Presets on a Networked Video Camera
• Viewing Tide Station Information
• Weather Layer Settings
• Inserting Memory Cards (GPSMAP 7x2/9x2/12x2 Touch/A12/7x2 Plus/9x2 Plus/12x2 Plus)
• Tacking and Gybing from Wind Hold
• Averaging Multiple Scans on the Radar Screen
• My device is not creating waypoints in the correct location
• DAB Presets
• Downloading the Manuals from the Web
• Turning on Echo Trails
• My Vessel Settings
• Boundaries
• Copying User Data to a Memory Card
• Software Updates
• Receiving Notifications
• Sailing Features
• Cleaning the Screen
• Video Camera Movement Control
• Setting All Songs to Repeat
• Setting the Color of the Active Track
• Setting the Communication Format for Each NMEA 0183 Port
• LiveScope and Perspective Sonar Setup
• Setting the LiveVü and FrontVü Transducer Transmit Angle