Sonar Alarms
The sonar alarms feature is a tool for situational awareness only and may not prevent grounding in all circumstances. It is your obligation to ensure safe operation of the vessel.
The shallow water alarm feature is a tool for situational awareness only and may not prevent groundings in all circumstances. It is your obligation to ensure safe operation of the vessel.
The Beeper setting must be turned on to make alarms audible (Sounds and Display Settings). Failure to set audible alarms could lead to injury or property damage.
From an applicable sonar view, select
.You can also open the sonar alarms by selecting
.- Shallow Water
-
Sets an alarm to sound when the depth is less than the specified value.
- Deep Water
-
Sets an alarm to sound when the depth is greater than the specified value.
- FrontVü Alarm
-
Sets an alarm to sound when the depth in front of the vessel is less than the specified value, which can help you avoid running aground (Setting the FrontVü Depth Alarm). This alarm is available only with Panoptix™ FrontVü transducers.
- Water Temp.
-
Sets an alarm to sound when the transducer reports a temperature that is 2°F (1.1°C) above or below the specified temperature.
- Contour
-
Sets an alarm to sound when the transducer detects a suspended target within the specified depth from the surface of the water and from the bottom.
- Fish
-
Sets an alarm to sound when the device detects a suspended target.
-
sets the alarm to sound when fish of all sizes are detected.
-
sets the alarm to sound only when medium or large fish are detected.
-
sets the alarm to sound only when large fish are detected.
-