Selecting the Transducer Type

This chartplotter is compatible with a range of accessory transducers, including the Garmin ClearVü™ transducers, which are available at garmin.com/transducers.

If you are connecting a transducer that was not included with the chartplotter, you may need to set the transducer type to make the sonar function properly.

NOTE: Not all chartplotters and sonar modules support this feature.
  1. Complete an action:
    • From a sonar view, select Menu > Sonar Setup > Installation > Transducers.

    • Select Settings > My Vessel > Transducers.

  2. Select an option:
    • To enable the chartplotter to detect the transducer automatically, select the transducer to change, and select Auto Detect.

    • To select the transducer manually, select the transducer to change, select the transducer model from the list, and select Change Model.

      NOTE: If you select the transducer manually, disconnect that transducer, and then connect a different transducer, you should reset this option to Auto Detect.
Copyright © Garmin. All rights reserved.GUID-413FE004-9D7D-474E-8423-3B787BC4A5BF v7