Connecting an inReach Device to the Chartplotter

You can connect a compatible inReach® device to the chartplotter to manage messages.

  1. Bring the inReach device within 3 m (10 ft.) of the chartplotter.
  2. From the main menu of the inReach device, select Setup > ANT+ > Status > On.
  3. On the chartplotter, select A/V, Gauges, Controls > InReach® > Start Pairing.

    The chartplotter begins searching for and connecting to the inReach device. This can take up to 60 seconds.

  4. If necessary, compare the code on the inReach device to the chartplotter, and select OK if they match.

The inReach and chartplotter connect automatically when they are within range.

Copyright © Garmin. All rights reserved.GUID-413FE004-9D7D-474E-8423-3B787BC4A5BF v7