Changing the Camera View
When using a compatible camera, such as a GC™ 245/255, you can change the appearance of the camera view.
- Select .
- If you have more than one camera connected to your network, select Source, and select a camera to configure.
-
Select
Camera View and select an option:
-
For a typical camera view, select Standard.
-
For a wide-angle view with slight circular distortions, select Fish Eye.
NOTE: Distance markers or guidance lines are not available when using the Fish Eye camera view. -
For an overhead view of the vessel, select Bird's Eye
NOTE: The bird's-eye view is available only if your camera was installed by your boat builder and if they properly calibrated the system. Distance markers are available when using the bird's-eye view, but guidance lines are not.
-