Skip to main content

Configuring the Heading Source of the Wind Gauge

You can specify the source of the heading displayed on the wind gauge. Magnetic heading is the heading data received from a heading sensor, and GPS heading is calculated by your chartplotter GPS (course over ground).

  1. From the wind gauge, select MENU > Edit Gauge Pages.
  2. In the window on the left, select Compass Gauge.
  3. Select Heading Source, and select an option:

    • To use heading data received from a heading sensor, select Magnetic.

    • To use heading data calculated using GPS, select GPS.

    NOTE: When moving at low speeds or when stationary, the magnetic compass source is more accurate than the GPS source.
GUID-C3CEA164-A1CB-4B15-92F2-5C04944CC6F3 v24
September 2024
© 2019 Garmin Ltd.