Inserting Memory Cards

As of software version 34.00, this device supports up to 1 TB SD® memory cards, formatted to exFAT with speed class 10 or higher.

  1. Open the access flap or door Callout number 1 on the front of the chartplotter.

    Memory card insertion with callout
  2. Insert the memory card Callout number 2.
  3. Press the card in until it clicks.
  4. Clean and dry the gasket and door.
    NOTICE

    To prevent corrosion, be sure the memory card, gasket, and door are thoroughly dry before closing the door.

  5. Close the door.
GUID-C3CEA164-A1CB-4B15-92F2-5C04944CC6F3 v24
September 2024