Adjusting the Bubble Level

The bow sight contains a built-in digital level and a clearly visible bubble level. If the digital level and the bubble level do not match, you can adjust the position of the bubble level.

  1. Select Device settings symbol > Level > View Gauge.
  2. Hold the bow sight level so the display shows 0.
  3. Loosen the two screws located on each side of the bubble level by one quarter turn.
  4. Adjust the bubble level until the bubble is centered and the digital display also reads 0.
  5. Tighten the two screws.
Copyright © Garmin. All rights reserved.GUID-F012B45E-6BEB-4C6C-A7F3-68A710C14C56 v6