Skip to main content

Pairing Your Wireless Sensors

Before you can pair, you must put on the heart rate monitor or install the sensor.

The first time you connect a wireless sensor using ANT‍+® or Bluetooth® technology, you must pair the watch and sensor. If the sensor has both ANT‍+ and Bluetooth technology, Garmin® recommends that you pair using ANT‍+ technology. After they are paired, the watch connects to the sensor automatically when you start an activity and the sensor is active and within range.

TIP: Some ANT‍+ sensors pair with your watch automatically when you start an activity with the sensor turned on and near the watch.
  1. Bring the watch within 3 m (10 ft.) of the sensor.
    NOTE: Stay 10 m (33 ft.) away from other wireless sensors while pairing.
  2. Hold Letter B symbol.
  3. Select Settings > Accessories > Add New.
  4. Select an option:

    • Select Search All.

    • Select your sensor type.

    After the sensor is paired with your watch, the sensor status changes from Searching to Connected. Sensor data appears in the data screen loop or a custom data field. You can customize the optional data fields (Customizing the Data Screens).

GUID-9CC4A873-E034-4A06-B2E0-636DCFE760EE v5
September 2024
© 2023 Garmin Ltd.