Transceiver Alerts
|
Alert Message |
Cause |
Device Action |
|---|---|---|
|
None |
Your paired watch has lost communication with the transceiver for 30 seconds. |
The tank pressure value flashes yellow. |
|
%1 is below reserve pressure. |
Your tank pressure is below the reserve pressure level. "%1" is replaced with the transceiver name. |
The tank pressure value turns yellow. The paired watch vibrates and plays a warning tone. |
|
%1 pressure is critically low. |
Your tank pressure is below the critical pressure level. "%1" is replaced with the transceiver name. |
The tank pressure value flashes red. The paired watch vibrates and plays a warning tone. |
|
%1 has a low battery. |
Fewer than 20 hours of dive time remain. "%1" is replaced with the transceiver name. |
The transceiver name flashes BATT. LOW when the battery is critically low. The paired watch vibrates and plays a warning tone. |
|
NO COMMS |
Your paired watch has lost communication with the transceiver for 60 seconds. |
The transceiver name flashes NO COMMS, dashed lines replace the tank pressure value, and the tank pressure value flashes red. The paired watch vibrates and plays a warning tone if connection alerts are enabled. |
|
Transmitter %1 failed to connect. |
Your paired watch cannot connect to the transceiver. You should update both devices to the latest software version. "%1" is replaced with the transceiver name. |
The paired watch vibrates and plays a warning tone. |