• Weather Data Broadcasts
  • Registering Your Device Using the Garmin Express App
  • Viewing Local Weather Information near a Buoy
  • Configuring the Video Appearance
  • Following the U-Turn Pattern
  • Man-Overboard and SOS Distress Calls Initiated from the Chartplotter
  • Mercury Troll Overlay
  • Contacting Garmin Support
  • Cancelling a Steering Pattern
  • Trolling Motor Settings
  • Customizing the Data Overlays
  • LiveScope and Perspective Appearance Settings
  • Starting Line Guidance
  • Yamaha Autopilot Overlay Bar
  • Forecast Information
  • Managing the Track Log Memory During Recording
  • Adjusting the Zone Volume
  • Viewing Boat Data on a Garmin Nautix Device
  • Garmin Express App
  • Communications Settings
  • Customizing the Channel Guide
  • Garmin Support Center
  • Viewing Messages
  • NMEA 2000 PGN Information
  • Restoring the Original Chartplotter Factory Settings
  • Camera Settings
  • Adjusting Gain on the Radar Screen Automatically
  • GPSMAP 7x2 Plus Specifications
  • LiveVü and FrontVü Layout Settings
  • Creating a Waypoint on the Chart
  • Surround View Camera System
  • Renaming a Camera
  • Enabling AIS Transmission Test Alerts
  • Current Station Information
  • Setting the Power Saver
  • LiveVü Forward and FrontVü Sonar Settings
  • Changing the Data Shown
  • Viewing a Marine Forecast or an Offshore Forecast
  • Heading and Projected Course of Activated AIS Targets
  • My device will not acquire GPS signals
  • Depth Layer Settings
  • Selecting a Preset
  • Adjusting Sea Clutter on the Radar Screen
  • Turning On and Off the Remote Backlight
  • Adjusting a Saved Auto Guidance Path
  • Adjusting the RealVü Sweep Speed
  • Adjusting Gain on the Radar Screen Manually
  • Force Trolling Motor Control
  • Parental Controls
  • LiveScope Sonar View
  • Adding and Editing a Digital Switching Page
  • Sounds and Display Settings
  • Trademark Notices
  • Chart Symbols
  • Disabling all Boundary Alarms
  • Acquiring MARPA Targets Automatically
  • Retracing the Active Track
  • Associating the Camera to a Video Source
  • Selecting a Sonar Source
  • Destinations
  • Setting the Water Temperature Offset
  • Setting Up the Battery Management Page
  • Man-Overboard Distress Calls Initiated from a VHF Radio
  • Radar
  • Controlling the Chartplotter
  • Customizing the Layout of a SmartMode or Combination Page
  • Sending an inReach Preset Message
  • Auto Guidance Path Configurations
  • Wi‑Fi Network
  • Panoptix Sonar Views
  • Navigating to a Point on the Chart
  • Browsing for and Navigating Parallel to a Saved Route
  • Updating the Reactor Autopilot Remote Control Software
  • Wireless Remote Control
  • Enabling the Gybe Inhibitor
  • Editing Information in a Position Report
  • Yamaha Engine Gauges
  • Searching for a Destination by Name
  • NMEA 0183 Settings
  • Weather Fronts and Pressure Centers
  • Adjusting the RealVü Viewing Angle and Zoom Level
  • Stopping Navigation
  • Saving a DAB Station as a Preset
  • Voice Control
  • Engaging Wind Hold from Heading Hold
  • LiveVü and FrontVü Appearance Settings
  • Yamaha Autopilot Screen
  • Clearing the Echo Trails
  • Pairing the Wireless Remote Control With the Chartplotter
  • Turning On the Chartplotter Automatically
  • My Vessel Layer Settings
  • Browsing for Music
  • Controlling Third-Party Equipment Installed on Your Boat
  • Sailboat Autopilot Operation
  • Radar Setup Menu
  • Pinning a Feature Button
  • Muting the Media Volume
  • Managing Presets
  • Downloading Garmin Quickdraw Community Maps Using ActiveCaptain
  • Viewing Information for a Different Tide or Current Station
  • Changing the Surround View Camera Layout
  • Autopilot Screen
  • Enabling a Guard Zone
  • Connecting to a Trolling Motor
  • Connecting an inReach Device to the Chartplotter
  • Searching for a Marine Services Destination
  • Adjusting the Distance from Shore
  • Adjusting the Color Intensity
  • City Forecasts
  • Tack and Gybe
  • Settings that are Synced on the Garmin Marine Network
  • Measuring the Range and Bearing to a Target Object
  • Tracks
  • Creating a Waypoint on the Sonar Screen
  • Showing Polar Data in Data Fields
  • Adding the Mercury Troll Control Overlay
  • Removing DAB Presets
  • GRID Remote Control
  • Pairing the GC 100 Camera with a Garmin Chartplotter
  • Viewing Weather Subscription Information
  • Deleting All Saved Routes
  • Trolling Motor Control Bar
  • Memory Cards
  • Setting the Heading Line and Angle Markers
  • Creating a New Combination Page
  • Replying to an inReach Message
  • Adjusting Rain Clutter on the Radar Screen
  • Celestial Information
  • Deleting a Combination Page
  • Supported Headsets
  • Activating a Target for an AIS Vessel
  • Adding a DSC Contact
  • Stopping the Race Timer
  • Setting the Vessel Type
  • Dometic Optimus Features
  • Specifications
  • Tide Station Information
  • Customizing the Gauges
  • Garmin Quickdraw Contours Settings
  • Engaging the Autopilot
  • inReach Messages
  • Setting Up the Power-Pole Anchor
  • Panoptix Transducer Installation Settings
  • Removing a MARPA Tag from a Targeted Object
  • Showing Satellite Imagery on the Navigation Chart
  • Heading Line and Angle Markers
  • Naming a Switch
  • Importing a Polar Table Manually
  • Showing the Distance Marker
  • Marking Your Present Location as a Waypoint
  • Adjusting the Heading with the Chartplotter in Step Steering Mode
  • Adding a SmartMode Layout
  • Changing the Sea Surface Temperature Color Range
  • Calibrating the Compass
  • Sharing Your Garmin Quickdraw Contours Maps with the Garmin Quickdraw Community Using ActiveCaptain
  • Configuring the Tank Level Sensors
  • Enabling and Adjusting a Radar No Transmit Zone
  • Showing and Hiding the Visual Bumper
  • Renaming a Sonar Source
  • AIS Distress Signals
  • Labeling a Switch
  • Auto Guidance
  • Viewing Fish Mapping Data
  • Showing and Hiding Switches
  • GPSMAP 12x2 Plus Connector View
  • RealVü 3D Historical Sonar View
  • Introduction
  • Navigating to a Distress Signal Transmission
  • Editing a Saved Track
  • Setting the Fuel Alarm
  • Scanning for DAB Stations
  • Deleting a Saved Route
  • Enabling the Shadow Drive Feature
  • Getting Started with the ActiveCaptain App
  • Saving System Information to a Memory Card
  • Reactor Autopilot Remote Control
  • Mercury Troll Control Features
  • Mercury Cruise Control Overlay
  • Position Tracking
  • Editing a Boundary
  • GPSMAP 7x2 Plus and GPSMAP 9x2 Plus Connector View
  • Making Notifications Private
  • Customizing the Autopilot Button Actions
  • Updating Software with the ActiveCaptain App
  • Setting Up the Timed Transmit Mode
  • Viewing a List of AIS and MARPA Threats
  • Updating Built-In Maps with a Memory Card and Garmin Express
  • Setting the Keel Offset
  • Radar Overlay and Chart Data Alignment
  • Adjusting the Level of Detail
  • Activating the Optimus Overlay Bar
  • Adjusting the Heading Using the Helm
  • Acquiring GPS Satellite Signals
  • Adjusting the Wind Sensor Orientation
  • Yamaha Autopilot Settings
  • Using Video Presets on Networked Video Cameras
  • Backing Up Data to a Computer
  • Calibrating a Water-Speed Device
  • Setting a Tack Delay
  • Adding the Trolling Motor Controls to Screens
  • Surface Pressure and Water Temperature Data
  • Waypoints
  • Adding the VIRB Action Camera Controls to Other Screens
  • Controlling the Autopilot with a GRID 20 Remote Control
  • Setting Up and Following a Search Pattern
  • Polar Tables
  • Updating Charts with ActiveCaptain
  • Radar Appearance Settings
  • Copying User Data from a Memory Card
  • Selecting the Transducer Type
  • LiveVü Forward Sonar View
  • Viewing the Event Log
  • GPSMAP 12x3 Specifications
  • Radar Gain
  • Customizing the Engines Shown in Gauges
  • Preferences Settings
  • Navigating to a Vessel in Distress
  • Naming Devices and Sensors on the Network
  • Auto Guidance Path Configurations
  • Optimus Limp Home Mode
  • Deleting All Saved Waypoints, Tracks, Routes, and Boundaries
  • MARPA
  • Setting Up and Following the Circles Pattern
  • Radar Overlay
  • Viewing Precipitation Information
  • Audio Settings
  • Adjusting the Autopilot Response
  • Enabling Smart Notifications
  • Viewing a Position Report
  • Saving a New Preset
  • Hiding and Showing the Menu Bar
  • Pairing the GRID Device with the Chartplotter from the Chartplotter
  • Split-Zoom Sonar View
  • Selecting a DAB Station from a Category
  • Starting a VIRB Video Slideshow
  • Viewing Forecast Sea Conditions Information for Another Time Period
  • Configuring the Number of Engines
  • NMEA 0183 Information
  • Connecting a Wireless Sensor to the Chartplotter
  • Creating and Saving an Auto Guidance Path
  • Downloading Garmin Quickdraw Community Maps Using Garmin Connect
  • Media Player
  • Panoptix Sonar Setup
  • Chart Layers
  • Automatically Turning Off the System
  • Viewing Video
  • Resetting Trip Gauges
  • Autopilot Overlay Bar
  • Assigning a MARPA Tag to an Object
  • Configuring the Sailing Wind Gauge
  • Enabling Some Engine Gauge Status Alarms
  • Yamaha Engine Data Settings
  • Creating a Frequency Preset
  • NMEA 2000 Settings
  • Showing AIS Vessels on the Radar Screen
  • Sonar Appearance Settings
  • Accessing Owner's Manuals on the Chartplotter
  • AIS Targeting Symbols
  • Capturing Screenshots
  • Linking a Boundary to a SmartMode Layout
  • Viewing Forecast Visibility Information for Another Time Period
  • Setting Parental Controls on SiriusXM Radio Channels
  • Making an Individual Routine Call to an AIS Target
  • Networked Chartplotter and VHF Radio Functionality
  • Chart Menu
  • Chartplotter Voice Commands
  • Projecting a Waypoint
  • Viewing Images on a Memory card
  • Setting the Camera to Mirrored Stern View
  • Sail Racing
  • Initiating a Search Pattern
  • Opening the Autopilot Screen
  • Water Layer Settings
  • Clearing the Active Track
  • Connecting a VIRB 360 Action Camera
  • Canceling an Auto Guidance Calculation in Progress
  • Setting the Scroll Speed
  • Configuring a Switch as Momentary
  • Pairing the GRID Device with the Chartplotter from the GRID Device
  • Downloading Updated Charts
  • Copying Screenshots to a Computer
  • Deleting a Saved Track
  • Setting the Vessel Type for Sailing Features
  • Fuel Settings
  • Pairing a Reactor Autopilot Remote Control With a Chartplotter
  • Presets
  • Reducing Cross Talk Clutter on the Radar Screen
  • Setting the Device Name
  • Setting Weather Alarms
  • Chart Subscriptions
  • Adjusting the Step Steering Increment
  • Tide, Current, and Celestial Information
  • Browsing for and Navigating to a Saved Waypoint
  • Editing a Saved Route
  • Showing and Adjusting the VRM and the EBL
  • Starting the Race Timer
  • Other Vessels Layer Settings
  • Garmin Marine Network
  • Connecting to the Garmin Quickdraw Community with Garmin Connect
  • Laylines Settings
  • Playing Music
  • Depth Range Shading
  • Selecting a Destination Using the Navigation Chart
  • LiveScope and Perspective Layout Settings
  • ActiveCaptain Roles
  • Disabling a Speaker Zone
  • Power-Pole Anchor System
  • Zooming In and Out Using the Touchscreen
  • Configuring the Navigation Light Option
  • Navigation Settings
  • Units Settings
  • Radar Installation Settings
  • Engine Condition Icons
  • Viewing a List of AIS and MARPA Threats
  • Making an Individual Routine Call
  • Activating a SiriusXM Subscription
  • Changing a Parental Passcode on a SiriusXM Radio
  • Viewing Aerial Photos of Landmarks
  • Visibility Information
  • Setting a Song to Repeat
  • Autopilot Configuration
  • Viewing Location and Object Information on a Chart
  • Rearranging the Category Items
  • GPSMAP 7x3 and GPSMAP 9x3 Connector View
  • Sonar Frequencies
  • Showing Tides and Current Indicators
  • Tips for Selecting a Radar Range
  • Inserting Memory Cards (GPSMAP 7x3/9x3/12x3)
  • Selecting the Preferred Heading Source
  • Setting and Following an Auto Guidance Path
  • Setting the Zoom Level on the Sonar Screen
  • Connecting a VIRB Action Camera
  • Selecting the Transducer Frequency
  • Adding a Label to a Garmin Quickdraw Contours Map
  • Setting the Safe-Zone Collision Alarm
  • Adjusting the Color Mode
  • Setting the Starting Line
  • Updating Your Charts Using the Garmin Express App
  • Enabling Alphabetical Search
  • Deactivating a Target for an AIS Vessel
  • Premium Charts
  • Supported Maps
  • Setting the Tuner Region
  • MARPA Targeting Symbols
  • Viewing the Wind Gauges
  • Viewing the DSC List
  • Using the Bilge Pump Switches
  • J1939 Information
  • Radar Settings
  • Managing Notifications
  • Saving the Active Track
  • DAB Playback
  • Home Screen
  • Weather Overlay
  • Sorting and Filtering Messages
  • Enabling the Mercury Cruise Control Overlay
  • Navigation Chart and Fishing Chart
  • Fish Eye 3D Settings
  • Activating the Chart Subscription Card
  • Selecting a DAB Preset from a List
  • Selecting the GPS Source
  • Editing a Saved Waypoint
  • Adjusting the Volume
  • Mapping a Body of Water Using the Garmin Quickdraw Contours Feature
  • Clearing All Locked Channels on a SiriusXM Radio
  • Viewing a List of all Waypoints
  • Selecting a Different Radar Source
  • Screenshots
  • System Alarms
  • Selecting a DAB Station from a List
  • Calibrating the Trolling Motor Compass
  • Connecting to the Garmin Quickdraw Community with ActiveCaptain
  • Purchasing a Chart Subscription with ActiveCaptain
  • My device will not turn on or keeps turning off
  • Measuring Distance on the Sonar Screen
  • Setting the Bow Offset
  • Incoming Distress Calls
  • Presets
  • Viewing a List of Saved Tracks
  • Networked Video Devices
  • LiveScope and Perspective Transducer Installation Settings
  • Radar Options Menu
  • Saving Messages to a Memory Card
  • Setting the Distance between the Bow and the GPS Antenna
  • Setting Alarms
  • Defining a Partial Guard Zone
  • Radio
  • Adjusting the Radar Range
  • Setting a Timed Arrival
  • Viewing Tide Station, Current Station, or Celestial Information for a Different Date
  • Changing the Tuning Mode
  • Traditional Sonar View
  • Setting the Keel Offset
  • Customizing the Startup Screen
  • Customizing the Close-Hauled Wind Gauge
  • GPSMAP 9x2 Plus Specifications
  • VIRB Action Camera Video Setup Settings
  • Viewing Information about a Targeted AIS Vessel
  • Optimus Overlay Symbols
  • Engine Alert Icons
  • Adjusting the Distance from Shore
  • Clearing All of the Messages
  • Customizing the Chartplotter
  • Echo Trails
  • Using the Starting Line Guidance
  • Selecting the Media Device and Source
  • RealVü 3D Forward Sonar View
  • Viewing E-label Regulatory and Compliance Information
  • Setting Songs to Shuffle
  • ActiveCaptain and Garmin Express
  • Changing the Data Shown in a Gauge
  • Configuring the Heading Source of the Wind Gauge
  • Navigating to a Tracked Vessel
  • Updating the Device Software Using a Memory Card
  • Removing a Preset
  • Adjusting the Range
  • Changing a Camera
  • Rotating the GRID Remote Input Device
  • Chart Settings
  • Turning Off AIS Reception
  • Wireless Wind Sensor
  • Radar My Vessel Layer Settings
  • Garmin SideVü Sonar View
  • Sonar Noise Rejection Settings
  • Creating and Navigating a Route From Your Present Location
  • VRM and EBL
  • GPSMAP 12x2 Plus Specifications
  • LiveVü Down Sonar View
  • Browsing for and Navigating a Recorded Track
  • Using the Touchscreen
  • Viewing Trip Gauges
  • Setting Up and Following the Zigzag Pattern
  • Setting the Anchor Drag Alarm
  • Mercury Engine Gauges
  • Saving a Track as a Route
  • Locating a SiriusXM Radio ID
  • SiriusXM Weather
  • Minimizing Side-Lobe Interference on the Radar Screen
  • Station Settings
  • Creating and Saving a Route
  • Converting a Route to a Boundary
  • Sharing Your Garmin Quickdraw Contours Maps with the Garmin Quickdraw Community Using Garmin Connect
  • Setting a Boundary Alarm
  • Device Configuration
  • Recommended Startup Image Dimensions
  • Marking a Man Overboard (MOB) Location
  • Loading the New Software on a Memory Card Using Garmin Express
  • Viewing Sea Temperature Information
  • Changing DAB Stations
  • MotionScope Doppler Radar Technology
  • System Settings
  • Changing the Functions of the Reactor Autopilot Remote Control Action Keys
  • Setting Up the Wi‑Fi Network
  • Editing a Group
  • AIS Aids to Navigation
  • Creating a Group
  • SiriusXM Satellite Radio
  • Deleting a Position-Report Call
  • ActiveCaptain App
  • Saving Video Presets on a Networked Video Camera
  • Storm Cell and Lightning Information
  • Garmin Quickdraw Community
  • Battery Management
  • Controlling Video Cameras Using On-Screen Controls
  • Perspective View
  • Radar Filter Settings
  • Animated Tide and Current Indicators
  • Setting Up the Gauges
  • Viewing Details about Navaids
  • VIRB Action Camera Settings
  • Viewing a List of AIS and MARPA Threats
  • Stopping the Transmission of Sonar Signals
  • Fish Eye 3D Chart View
  • Selecting a Video Source
  • Warning Manager
  • GPSMAP 12x3 Connector View
  • Configuring the Speed Source
  • Tips and Shortcuts
  • Creating a Waypoint at a Different Location
  • Deleting a VIRB Video
  • Viewing a Camera Feed Full Screen
  • Setting the DAB Tuner Region
  • Using a Wireless Headset with a Garmin Chartplotter
  • Basic Navigation Questions
  • Following an Orbit Pattern
  • Routes
  • GPS Settings
  • Laylines Settings
  • Deleting a Waypoint or an MOB
  • Sonar Setup
  • Finding and Navigating a Saved Route
  • Advanced Sonar Settings
  • Viewing Boat Data on a Garmin Watch
  • Disconnecting the Remote Control from All Chartplotters
  • Synchronizing the Fuel Data with the Actual Vessel Fuel
  • Viewing Sea Conditions
  • Configuring the Garmin Boat Switch Device
  • Viewing Forecast Information for Another Time Period
  • Optimus Overlay Bar Overview
  • Resetting the Station Layouts
  • Enabling Status Alarms for Engine Gauges
  • Adjusting the Length of the Echo Trails
  • Garmin Quickdraw Contours Mapping
  • Setting and Following a Direct Course Using Go To
  • Hurricane Information
  • Unlocking SiriusXM Parental Controls
  • Viewing Graphs
  • Showing Tracks
  • GPSMAP 9x3 Specifications
  • Charts and 3D Chart Views
  • Radar Overlay Settings
  • DSC List
  • Digital Selective Calling
  • Deleting All Waypoints
  • Viewing the Gauges
  • Setting the Fuel Alarm
  • Selecting a DSC Channel
  • Assigning a Shortcut to the Trolling Motor Remote Control Shortcut Keys
  • Zooming in a Panoptix LiveVü or LiveScope Sonar View
  • RealVü Appearance Settings
  • Moving a Saved Waypoint
  • Pairing a Wireless Headset with a Garmin Chartplotter
  • Viewing Almanac Information from the Navigation Chart
  • Mercury Cruise Control
  • Changing the Wind Hold Type
  • Viewing a List of Routes and Auto Guidance Paths
  • FrontVü Sonar View
  • LiveScope and Perspective Sonar Settings
  • Radar Interpretation
  • Controlling a Video Camera Using Gestures
  • Garmin Boat Switch
  • Turning On the A-Scope
  • Viewing Sonar History
  • AIS Distress Signal Device Targeting Symbols
  • Appendix
  • Adjusting the Volume and Audio Levels
  • Saving a Station as a Preset
  • Viewing Buoy Reports
  • Automatic Identification System
  • Transmitting Radar Signals
  • Communication with Wireless Devices
  • Setting the FrontVü Depth Alarm
  • Enabling the Mercury Helm
  • Alternating Among Multiple Video Sources
  • Connecting a Wireless Device to the Chartplotter
  • Stopping the Transmission of Radar Signals
  • Autopilot
  • Sonar Alarms
  • Enabling Screen Lock
  • Opening the Media Player
  • Other Vessels Settings
  • Setting the Graph Range and Time Scales
  • Sonar Fishfinder
  • Customizing Engine Gauge and Fuel Gauge Limits
  • Sonar Models Specifications
  • Transducer Installation Settings
  • Sonar Alarms
  • Configuring the Recording Interval of the Track Log
  • Creating a Boundary
  • Configuring NMEA 0183 Output Sentences
  • SiriusXM Equipment and Subscription Requirements
  • Garmin ClearVü Sonar View
  • Customizing Pages
  • Navigation with a Chartplotter
  • Tacking and Gybing from Heading Hold
  • Creating a Waypoint at the Position of a Tracked Vessel
  • Media Player Icons
  • Changing the Wi‑Fi Host
  • Surface Winds
  • Engaging Wind Hold
  • Setting the Bow Offset
  • Viewing Information about a MARPA-tagged Object
  • Removing MARPA Targets Automatically
  • Yamaha Autopilot
  • Selecting the Home Zone
  • Sonar Sharing
  • Restoring Backup Data to a Chartplotter
  • GPSMAP 7x3 Specifications
  • Stereo Zones and Groups
  • Setting a Custom Park Position
  • Using Dimmable Lights
  • Restoring Default Parental Control Settings Values
  • Minimizing Nearby Large-Object Interference
  • Naming Video Presets on a Networked Video Camera
  • Converting a Track to a Boundary
  • Navigation Alarms
  • Adjusting the Visual Bumper
  • On-Screen Buttons
  • Viewing Vessel Trails on the Chart
  • Installing the Garmin Express App on a Computer
  • Viewing System Software Information
  • Wind Hold
  • Following the Williamson Turn Pattern
  • Adjusting the Wind Hold Angle
  • Controlling the VIRB Action Camera Video Playback
  • Measuring and Setting the Front-of-Boat Offset
  • Measuring a Distance on the Chart
  • Engine Alert Icons
  • Setting Up and Following the Cloverleaf Pattern
  • Renewing Your Subscription
  • Selecting a File Type for Third-Party Waypoints and Routes
  • Changing the Wireless Channel
  • Individual Routine Calls
  • Receiving inReach Messages
  • Weather Warnings and Weather Bulletins
  • RealVü 3D Down Sonar View
  • Video Settings
  • User Data Layer Settings
  • Adjusting the Audio Level
  • Steering Patterns
  • Power-Pole Overlay
  • HDMI Out Video Considerations
  • Changing the Radio Station
  • Chart Layer Settings
  • Sharing and Managing User Data
  • Troubleshooting
  • Pausing the Sonar Display
  • Turning On DSC
  • Deleting All Saved Tracks
  • Enabling the Power-Pole Anchor Overlay
  • Split-Frequency Sonar View
  • Updating the Media Player Software
  • Menu Bar
  • SideVü Scanning Technology
  • Deleting a Boundary
  • Digital Switching
  • Adjusting the Backlight
  • Selecting the Number of Engines Shown in Gauges
  • Changing the Voice Control Language
  • Enabling the Autopilot Controls on a Garmin Watch
  • Saving a SiriusXM Channel to the Presets List
  • Defining a Circular Guard Zone
  • Garmin VIRB Action Cameras
  • Wave Height, Wave Period, and Wave Direction
  • Route Color Coding
  • Gauges and Graphs
  • Locking and Unlocking the Touchscreen
  • Activating Video Presets on a Networked Video Camera
  • Device Overview
  • Controlling the VIRB Action Camera with the Chartplotter
  • Viewing Tide Station Information
  • Weather Layer Settings
  • Inserting Memory Cards (GPSMAP 7x2 Plus/9x2 Plus/12x2 Plus)
  • Tacking and Gybing from Wind Hold
  • Averaging Multiple Scans on the Radar Screen
  • My device is not creating waypoints in the correct location
  • DAB Presets
  • Accessing the Manuals from the Web
  • Turning on Echo Trails
  • My Vessel Settings
  • Boundaries
  • Copying User Data to a Memory Card
  • Software Updates
  • Receiving Notifications
  • Sailing Features
  • Cleaning the Screen
  • Setting All Songs to Repeat
  • Setting the Color of the Active Track
  • Video Camera Movement Control
  • Setting the Communication Format for Each NMEA 0183 Port
  • Setting the LiveVü and FrontVü Transducer Transmit Angle
  • LiveScope and Perspective Sonar Setup