Skip to main content

Configuring the Heading Source of the Wind Gauge

You can specify the source of the heading displayed on the wind gauge. Magnetic heading is the heading data received from a heading sensor, and GPS heading is calculated by your chartplotter GPS (course over ground).

  1. From the wind gauge, select Options > Compass Gauge > Heading Source.
  2. Select GPS or Magnetic.
    NOTE: When moving at low speeds or when stationary, the magnetic compass source is more accurate than the GPS source.
GUID-413FE004-9D7D-474E-8423-3B787BC4A5BF v12
September 2024
© 2021 Garmin Ltd.