Select Settings > System > Station Information.

Change Station

Sets the entire station to a new set of defaults based on the location of this station. You can also select to use this display as a stand-alone, individual display, instead of grouping it with other displays to make a station.

GRID™ Pairing

Allows you to pair a GRID™ remote input device with this station.

Display Order

Sets the order of the displays, which is important when using a GRID remote input device.

Autopilot Enabled

Allows you to control the autopilot from this device.

Reset Layouts

Resets the layouts in this station to the factory default settings.

Reset Station Settings

Resets all station settings to on all connected devices in the station to the factory default settings, and requires initial station setup.