Skip to main content

Starting a Triathlon or Multisport Activity

Before you start an activity, you should charge the device (Charging the Device). Before you can use an ANT‍+® sensor, you must pair the sensor with your device (Pairing ANT‍+ Sensors).

  1. Pair your ANT‍+ sensors, such as a foot pod or heart rate monitor (optional).
  2. From the clock, select START.
  3. Select Triathlon or a custom multisport activity.
  4. Go outside, and wait while the device locates satellites.
  5. Select START to start the timer.

    History is recorded only while the timer is running.

  6. Start your first activity.
  7. Select LAP to transition to the next activity.

    If transitions are turned on, the transition time is recorded separately from the activity times.

  8. If necessary, select LAP to start the next activity.
  9. Select UP or DOWN to view additional data pages (optional).
  10. After you complete your activity, select STOP > Save.
Copyright © Garmin. All rights reserved.GUID-4FFB52AE-9CA9-47F5-B9E6-45D823872585 v7