Skip to main content

Pairing Additional Cameras with a Garmin Navigation Device

You can pair up to 4 BC™ 40 wireless backup cameras with a compatible Garmin® navigation device.

  1. Install batteries in the camera.

    The camera enters pairing mode automatically, and the LED flashes blue while the camera is in pairing mode. The camera remains in pairing mode for five minutes. If pairing mode expires, you can remove and reinstall the batteries.

  2. Bring the compatible Garmin navigation device outside your vehicle and within 1.5 m (5 ft.) of the camera, and turn on the navigation device.
  3. On the Garmin navigation device, select Settings > Wireless Camera > Add New Camera.

    The device pairs with your camera, and the guidance line configuration screen appears.

  4. Use the on-screen arrows to position the guidance lines, and select Back (Aligning the Guidance Lines).

    If the camera or vehicle is not ideally positioned to complete the guidance line alignment, you can complete the alignment later from the camera settings.

  5. Enter a name for the camera (optional).

    You should use a descriptive name that clearly identifies the location of the camera.

  6. Select Done.

After you pair multiple cameras, you can switch between cameras from the camera view (Switching Cameras) and set the order in which the cameras appear (Changing the Camera Order).

Copyright © Garmin. All rights reserved.GUID-A52DB25D-9CB5-49CA-8926-E861641EF176 v3