Skip to main content

Pairing a Dog Collar Device with the Handheld Device

NOTE: If your handheld device and dog collar device were included in the same package, the devices are already paired.
  1. Turn on the handheld device (Turning On the Device).
  2. Select a color with the toggle switch.

    The dog collar device will be assigned to this color.

  3. Turn the intensity dial to N.
  4. Select the green tone key.
  5. Select the top training key.
  6. Follow the on-screen instructions to select auto, tree, or point for the type of dog wearing the collar.

    Pairing status appears on the handheld device screen. The handheld device is ready to pair. You can cancel pairing by pressing the green tone key.

  7. If the dog collar device is on, turn it off (Turning Off the Device).
  8. Hold the power key on the dog collar device until it emits two series of beeps (about 2 seconds), and then release the power key.

    The status LED flashes green rapidly. You can now pair the dog collar device with the handheld device.

The handheld device vibrates and a check mark appears on the screen when the devices have paired successfully.

TIP: You must obtain GPS signals on both devices before the handheld device displays the dog collar device battery status, distance, and direction (Acquiring Satellite Signals (Pro 550 Plus)).
Copyright © Garmin. All rights reserved.GUID-6F59C1FE-F1F8-4AF3-9397-F68DD13DD423 v4