Skip to main content

Pairing Your Bike Light with Another Edge Device

  1. Bring the Edge® device within range (1 m) of the sensor.
    NOTE: Stay 10 m (33 ft.) away from other ANT‍+® bike lights while pairing.
  2. Turn on the Edge device.
  3. From the Sensors menu, select Add Sensor > Search All.
  4. While the headlight is turned off, hold the Varia™ device key for 2 seconds to enter pairing mode.

    The status LED flashes purple.

  5. Select your sensor.

When the sensor is paired with your Edge device, the status icon appears solid on the connections page.

Copyright © Garmin. All rights reserved.GUID-FD3E6E17-4A64-4236-8D3B-510A13E097E6 v3