Select Enable to enable the light network.

Select Network Options > Light Mode to set the light intensity mode for all lights in your network (Light Mode Settings).

Select Network Options > Light Beam Activated to turn on the headlight automatically when the timer starts or when the Edge device turns on.

Select Network Options > Test Lights to check that each light in your network is set up correctly (Testing the Light Network).

Select Network Options > Auto Beam Adjustment to adjust the headlight intensity automatically based on the rate of speed. A high intensity is used at high speeds, and a low intensity is used at low speeds.

Select a light to view device information and customize each light in your network (Light Network Settings).