Sonar Frequencies
Pausing the Sonar
Setting the Bottom Search Limit
Browsing for and Navigating a Saved Route
Setting the Gain Manually
Full Screen Sonar
Flasher
Waypoint Map Settings
Overlay Number Settings
System Information
Split-Zoom View
Creating a Waypoint on the Sonar Screen Using a Different Location
Specifications
Contacting Garmin Product Support
My sonar does not work
Selecting Frequencies
Split-Screen Frequency
Selecting the Transducer Type
Adjusting the Color Mode
Navigation Alarms
Adjusting the Range of the Depth Scale
Garmin ClearVü Sonar View
Managing the Track Log Memory During Recording
Deleting a Saved Route
Marking and Navigating to a Man Overboard Location
Device Configuration
Editing a Saved Waypoint
Adding a New Layout to the Home Screen
Viewing a List of Routes
Creating a Frequency Preset
Trademark Notices
GPS Satellite Signal Acquisition
My Vessel Settings
Setting the Keel Offset
My device does not turn on
Panning on the STRIKER 4
Numbers
Sharing Waypoints and Routes Across Devices
Setting the Beeper
Restoring the Factory Default Settings
Adjusting the Zoom
Measuring Distance on the Waypoint Map
Sonar
Sonar Setup
Waypoints
Navigating to a Waypoint
Deleting All Saved Routes
System Alarms
Unit Settings
Setting the Gain Automatically
Showing and Adjusting the Depth Line
Editing a Saved Route
Configuring the Appearance of Suspended Targets
Deleting All Saved Waypoints, Routes, and Tracks
Introduction
Troubleshooting
Sonar Alarms
Sonar Noise Rejection Settings
Appendix
Registering Your Device
Setting the Color of the Track
Navigation Settings
Customizing the Home Screen
Adjusting the Backlight
Creating a Waypoint at a Different Location
Deleting All Waypoints
Data Graphs
Sonar Gain
Configuring the Recording Interval of the Track Log
Adding a New Layout to the Home Screen of the STRIKER 5 or 7
System Settings
Sonar Appearance Settings
Creating and Navigating a Route Using the Waypoint Map
Device Keys
Setting the Water Temperature Offset
Routes
Zooming on the STRIKER 4
Locking the Screen to the Water Bottom
Alarms Settings
My device is not creating waypoints in the correct location
Track
Turning on the A-Scope
Marking Your Present Location as a Waypoint
Adding the Numbers Screen
Setting the Scroll Speed
Clearing the Track
Creating a Waypoint on the Sonar Screen Using Your Present Location
Adding the Data Graphs Screen
Deleting a Waypoint or an MOB
SideVü Sonar View
Home Screen