Adjusting the Zoom
You can adjust the zoom manually by specifying the span and a fixed starting depth. For example, when the depth is 15 m and the starting depth is 5 m, the device displays a magnified area from 5 to 20 m deep.
You also can allow the device to adjust the zoom automatically by specifying a span. The device calculates the zoom area from the bottom of the water. For example, if you select a span of 10 m, the device displays an magnified area from the bottom of the water to 10 m above the bottom.
- From a sonar screen, select .
-
Select an option:
-
Select Bottom Lock to lock the screen to the water bottom.
-
Select Manual to manually set the zoom.
-
Select Auto to automatically set the zoom.
-
Select Split Zoom to turn on the split-zoom view.
-