Scanning Saved Channels

You can scan only the channels you have saved. When a saved channel is broadcasting, the radio pauses on that channel until the broadcast stops. After four seconds of inactivity on a channel, the radio resumes scanning.

NOTE: When you turn on ATIS (Automatic Transmitter Identification System), the radio does not scan or save channels.
  1. Select SCAN > SAVED.
  2. Select an option:
    • To exclude the currently active channel from subsequent passes and resume scanning, select SKIP.

    • To scan channel 16 each time another saved channel is scanned, select +CH16.

      For example, the radio scans saved channel 21, channel 16, saved channel 25, channel 16, and so on.

      +CH16 appears on the device screen.

    • To stop scanning channel 16, select -CH16.

      For example, the radio scans saved channel 21, saved channel 25, and so on.

    • To end the scan, select EXIT.

      The radio stops scanning and tunes to the last used active channel.

Copyright © Garmin. All rights reserved.GUID-B7A0C5D8-4F64-4F06-BA16-2206EFCAF537 v4