Skip to main content

Using the Scope

Before you can use the scope, you must calibrate it for your crossbow and bolt.

  1. Point the scope at your target.
  2. Hold the ranging button until the measured range appears next to the reticle.
    TIP: TARGET LOCKED appears below the reticle when range finder readings are consistently the same value.

    Rangefinder reticle
  3. Release the ranging button.

The device displays an aim point for the measured distance.

Copyright © Garmin. All rights reserved.GUID-693FA105-1B57-421A-AFE2-6D258F86A8B3 v2