Other Service Kits
|
Description |
Service Kit Number |
Notes |
|---|---|---|
|
Hinge Pins |
S00-01000-20 |
Includes all hinge pins for the mount and steering system. |
|
Hinge Pins and Bushings |
S00-01000-46 |
Includes all hinge pins and bushings for the mount and steering system. |
|
Steering System Bushings |
S00-01000-30 |
Bushings for the upper and lower link hinge pins on the steering system. Includes three sets of bushings. For the Force® Pro trolling motor, you should use the bushings marked 12-3 and 15-3. |
|
Pull Handle and Hardware |
S00-01000-26 |
|
|
Stabilizer Bumpers |
S00-01000-62 |
See the Stabilizer Installation Instructions at garmin.com/manuals/force_pro_trolling_motor. |
|
Propeller Hardware |
S00-01000-28 |
Includes propeller nut, washers, propeller shaft pin and sacrificial anode. |
|
Spanner Wrench |
S00-01000-44 |
Required for removing and installing the transducer cable compression nut on the bottom of the shaft. |
|
Propeller Drive Motor Power Connector Set Screws |
S00-01100-31 |